int13check done
init APM...TKSetSSBase()
CPU0 CR0: 0x00000013 -> 0x00000033
CPU0 CR4: 0x00000000 -> 0x00000219
FLAT CS: 0168
setArenaInfo()
setArenaData()
VAL = 3072
PGInit(FFE57000,FFDB9000)   ...done
syiDosHlpFix32()
SwitchStack()
1 PGSwitchContextInit()
MPR0Enter()
VMInit(0xFFEB5000)
SELReinit()
PhysToVirtInit()
iniReAllocTCBSlots()
sifsSwitchToMemfile()
MemFile: os4krnl.ini is missing
þþMemFile: ACPI4.BPD is missing
þþþMemFile: ACPI.CFG is missing
þþMemFile: PREVIOUS.ACP is missing
þþþMemFile: CHKFORCD.CMD is missing
þþþþþþþþþþþþþþþþþþþþþþþþþþþþþþþ
MemFile: 34 entries have been loaded, total:1146880 bytes
syiInitInt13Thread()
Loading: oemhlp.bpd 

OEMHLP$ for OS/4 kernel svn 4832

00:00:00 Class 0600 Hdr 00
00:01:00 Class 0604 Hdr 01
00:07:00 Class 0604 Hdr 01
00:0A:00 Class 0604 Hdr 01
00:11:00 Class 0101 Hdr 00
00:12:00 Class 0C03 Hdr 80
00:12:01 Class 0C03 Hdr 00
00:12:02 Class 0C03 Hdr 00
00:13:00 Class 0C03 Hdr 80
00:13:01 Class 0C03 Hdr 00
00:13:02 Class 0C03 Hdr 00
00:14:00 Class 0C05 Hdr 80
00:14:01 Class 0101 Hdr 00
00:14:02 Class 0403 Hdr 00
00:14:03 Class 0601 Hdr 80
00:14:04 Class 0604 Hdr 81
00:14:05 Class 0C03 Hdr 00
00:18:00 Class 0600 Hdr 80
00:18:01 Class 0600 Hdr 80
00:18:02 Class 0600 Hdr 80
00:18:03 Class 0600 Hdr 80
00:18:04 Class 0600 Hdr 80
00:18:05 Class 0600 Hdr 80
01:05:00 Class 0300 Hdr 80
01:05:01 Class 0403 Hdr 80
02:00:00 Class 0C03 Hdr 00
03:00:00 Class 0200 Hdr 00
TKCreateVDMProcess
....Ok
Loading: acpi4.bpd File not found or corrupted
   PIC mask = 0xFFFB IF = 1
InitPSD()
PSD=ACPI.PSD /ST=0
PSD said we have 8 CPUs
Set 8 CPUs AffMask:0x000000FF
CPU1 CR0: 0x80010011 -> 0x80010033
CPU1 CR4: 0x00000000 -> 0x00000219
CPU1 waiting end of boot
CPU1 is spining on CpuInitSpinLock_PM
CPU2 CR0: 0x80010011 -> 0x80010033
CPU2 CR4: 0x00000000 -> 0x00000219
CPU2 waiting end of boot
CPU2 is spining on CpuInitSpinLock_PM
CPU3 CR0: 0x80010011 -> 0x80010033
CPU3 CR4: 0x00000000 -> 0x00000219
CPU3 waiting end of boot
CPU3 is spining on CpuInitSpinLock_PM
CPU4 CR0: 0x80010011 -> 0x80010033
CPU4 CR4: 0x00000000 -> 0x00000219
CPU4 waiting end of boot
CPU4 is spining on CpuInitSpinLock_PM
CPU5 CR0: 0x80010011 -> 0x80010033
CPU5 CR4: 0x00000000 -> 0x00000219
CPU5 waiting end of boot
CPU5 is spining on CpuInitSpinLock_PM
CPU6 CR0: 0x80010011 -> 0x80010033
CPU6 CR4: 0x00000000 -> 0x00000219
CPU6 waiting end of boot
CPU6 is spining on CpuInitSpinLock_PM
CPU7 CR0: 0x80010011 -> 0x80010033
CPU7 CR4: 0x00000000 -> 0x00000219
CPU7 waiting end of boot
CPU7 is spining on CpuInitSpinLock_PM
CPUs inited: 8
InitStage: 2 ------------------------------
8
   PIC mask = 0xFFFF IF = 0
== InitDeviceMgr ==
InitDPB()
STI()
   PIC mask = 0xFFFF IF = 1
InitBaseList()
Loading: RESOURCE.SYS /SL:N ....Ok
Loading: CLOCK03c.SYS 

clock$ & timer0 for OS/4 kernel svn 4832

ACPI based Platform Specific Driver v 3.23.01
Copyright (c) 2014-2016 Arca Noae LLC
This copy of ACPI is licensed to: elbert.pol@gmail.com #anp01b48e6556
WARNING: Unsupported kernel detected.
ACPICA$ is found 0x04980706
HPET:
  ID:           0x00008300
  Addr:
   SpaceId:     0x00
   BitWidth:    0x08
   BitOffset:   0x00
   AccessWidth: 0x00
   Address      0xFED00000
  Seq#:         0x02
  MinTick:      0x0014
  Flags:        0x00

HPET is detected, clock frequency 14318180 Hz
....Ok
Loading: SCREEN03.SYS 

screen$ for OS/4 kernel svn 4832

Found PCI VGA at 01:05:00
PCS dumped
DeviceID 0x9616
BAR sizing done!
....Ok
Loading: KBDBASE.SYS ....Ok
AddSnoopers()
Loading: ISAPNP.SNP ....Ok
Loading: IBMKBD.SNP ....Ok
Loading: PCIBUS.SNP ....Ok
Loading: PNP.SYS ....Ok
Loading: IBMKBD.SYS ....Ok
Loading: TIMER0.SYS Init fail
Loading: PRINT01.SYS ....Ok
Loading: CHKDSK.SYS ....Ok
Loading: USBOHCD.SYS ....Ok
Loading: USBOHCD.SYS ....Ok
Loading: USBOHCD.SYS ....Ok
Loading: USBOHCD.SYS ....Ok
Loading: USBOHCD.SYS ....Ok
Loading: USBEHCD.SYS ....Ok
Loading: USBEHCD.SYS ....Ok
Loading: USBD.SYS ....Ok
Loading: USBHID.SYS ....Ok
Loading: CADH.SYS ....Ok
Loading: APM.ADD ....Ok
Loading: OS2AHCI.ADD 
RegisterKrnlExit INPUT
 SEL:OFF: 0x07D8001A
 DS     : 0x000007D0
 TYPE   : 0x00000004
 FLAGS  : 0x10000000

RegisterKrnlExit OUTPUT
 Return Code hex : 0x00000000
 Return Code dec : 0
....Ok
Loading: DANIS506.ADD /!BIOS ....Ok
Loading: IBM1FLPY.ADD ....Ok
Loading: USBMSD.ADD /REMOVABLES:8 /FLOPPIES:0 ....Ok
Loading: DANIATAP.FLT ....Ok
Loading: OS2DASD.DMD ....Ok
Loading: OS2LVM.DMD ....Ok
MemFile: Memory is released
== Init BASEDEVs done ==
InitFileSystem2()
-A-IFS:JFS
== Jump to Ager ==
syiReinitAdds: OS2AHCI
syiReinitAdds: USB Mass Storag
0xE820 mem
Base: 0x00000000_00000000 Size: 0x00000000_0009F000
Base: 0x00000000_00100000 Size: 0x00000000_CFD80000
Base: 0x00000001_00000000 Size: 0x00000000_1F000000
page_rec_num 124 
== Jump to R3 Init ==
R3 Init started
Open CON
InitStdErrIntercept()
InitEnvironment()
CheckFileSys()
cpInit()
GetLoadableEntries()
TKAllocR2Stacks for 0x0000000D



DevFS IOCTL 0x0B:0x01 DHdr:0x05780000



syiDisplaySavedMessagesR3()
SICGFUN1
cpActivate()
SetMaxFH
RegisterJITDebug()
BeginStdErrIntercept()
Install PDD and FSD
DEVICE=C:\OS2\BOOT\UNICODE.SYS
-I--C--R-IFS:JFS
-I--C--A-IFS:HPFS
-I--C--A-IFS:FAT32
-I--C--A-IFS:UDF
-I--C--A-IFS:CDFS
DEVICE=C:\OS2\BOOT\OS2CDROM.DMD /Q
DEVICE=C:\IBMCOM\LANMSGDD.OS2 /I:C:\IBMCOM /S 
DEVICE=C:\IBMCOM\PROTMAN.OS2 /I:C:\IBMCOM
DEVICE=C:\OS2\BOOT\TESTCFG2.SYS
DEVICE=C:\OS2\BOOT\DOS.SYS
DEVICE=C:\OS2\BOOT\PMDD.SYS
DEVICE=C:\OS2\BOOT\USBPRT.SYS
DEVICE=C:\ECS\SYSTEM\AMouse\AMOUSE.SYS SMP
DEVICE=C:\OS2\BOOT\USBMOUSE.SYS
DEVICE=C:\OS2\BOOT\POINTDD.SYS
DEVICE=C:\OS2\BOOT\USBKBD.SYS
DEVICE=C:\MMOS2\ssmdd.sys /S:64 /P:64 /H:256 /Q:1024 /E:1024
DEVICE=C:\MMOS2\r0stub.sys
DEVICE=C:\MMOS2\MMPLAYER\midi.sys
DEVICE=C:\MMOS2\vcshdd.sys
DEVICE=C:\MMOS2\UNIAUD32.SYS /V
DEVICE=C:\MMOS2\UNIAUD16.SYS /V /C
DEVICE=C:\OS2\BOOT\USBRESMG.SYS
DEVICE=C:\OS2\BOOT\vboxdrv.sys
VBoxDrv.sys: use ApiExt: 2
DEVICE=C:\MPTN\PROTOCOL\SOCKETSK.SYS
DEVICE=C:\MPTN\PROTOCOL\AFOS2.SYS
DEVICE=C:\MPTN\PROTOCOL\AFINETK.SYS
DEVICE=C:\IBMCOM\MACS\MMRE.OS2
DEVICE=C:\OS2\GRADD.SYS
DEVICE=C:\OS2\BOOT\USBCOM.SYS
DEVICE=C:\OS2\BOOT\USBAUDIO.SYS
-I--C--A-IFS:NDFS32
BuildPhysDiskTable: [LVM DMD] rc: 0x0100
NumFixedDisks: 11
BuildPhysDiskTable: [        ] rc: 0x0100
NumFixedDisks: 0
BuildPhysDiskTable: [CD-ROM1$] rc: 0x0100
NumFixedDisks: 0
== BuildPhysDiskTable done ==
ReinitDDs: [USBAUD1$] rc: 0x0100
ReinitDDs: [COM1    ] rc: 0x0100
ReinitDDs: [GRADD$  ] rc: 0x0100
ReinitDDs: [MMRE$   ] rc: 0x0100
ReinitDDs: [AFINET$ ] rc: 0x0100
ReinitDDs: [AFOS2$  ] rc: 0x0100
ReinitDDs: [USBRESM$] rc: 0x0100
ReinitDDs: [UNIMID1$] rc: 0x0100
ReinitDDs: [UNIAUD1$] rc: 0x0100
ReinitDDs: [ALSA32$ ] rc: 0x0100
ReinitDDs: [ALSAHLP$] rc: 0x8103
ReinitDDs: [MIDI$   ] rc: 0x0100
ReinitDDs: [SSM$    ] rc: 0x0100
ReinitDDs: [USBKBD$ ] rc: 0x0100
ReinitDDs: [USBMOU$ ] rc: 0x0100
ReinitDDs: [MOUSE$  ] rc: 0x0100
ReinitDDs: [$USBPRT ] rc: 0x0100
ReinitDDs: [TESTCFG$] rc: 0x0100
ReinitDDs: [UNICODE$] rc: 0x0100
ReinitDDs: [LVM$    ] rc: 0x0100
ReinitDDs: [USBMSD$ ] rc: 0x0100
ReinitDDs: [OS2AHCI$] rc: 0x8103
ReinitDDs: [APM$    ] rc: 0x0100
ReinitDDs: [USBHID$ ] rc: 0x0100
ReinitDDs: [USBD$   ] rc: 0x0100
ReinitDDs: [USBEHC2$] rc: 0x0100
ReinitDDs: [USBEHCD$] rc: 0x0100
ReinitDDs: [USBOHC5$] rc: 0x0100
ReinitDDs: [USBOHC4$] rc: 0x0100
ReinitDDs: [USBOHC3$] rc: 0x0100
ReinitDDs: [USBOHC2$] rc: 0x0100
ReinitDDs: [USBOHCD$] rc: 0x0100
ReinitDDs: [CHKDSK$ ] rc: 0x0100
ReinitDDs: [SCREEN$ ] rc: 0x0100
ReinitDDs: [OEMHLP$ ] rc: 0x0100
== ReinitDDs done ==
PSDDisableAccess from sicgf0
Install PDD and FSD end
EndStdErrIntercept()
SICGFUNE
SwapPath ==> C:\OS2\SYSTEM
syiDisplaySavedMessagesR3()
SetRelMaxFH
StartDOSMode()
DosCloseMessageFile()
BeginStdErrIntercept()
StartAltF1Process()
StartDaemonProcesses()
CALL=C:\ECS\BIN\CACHEF32.EXE /S /F
RUN=C:\OS2\SYSTEM\LVMALERT.EXE
RUN=C:\OS2\EXTENDFS.EXE *
CALL=C:\IBMCOM\PROTOCOL\NETBIND.EXE
RUN=C:\IBMCOM\LANMSGEX.EXE
RUN=C:\OS2\SMSTART.EXE
RUN=C:\MPTN\BIN\CNTRL.EXE
CALL=C:\OS2\CMD.EXE /Q /C C:\MPTN\BIN\MPTSTART.CMD >NUL
DosQueryRASInfo is not supported, index 0x00000001
RUN=C:\MMOS2\mmfix.exe
RUN=C:\MMOS2\mididmon.exe
RUN=C:\MMOS2\mmhelpdd.exe
CALL=C:\ecs\system\dmt\DMT.EXE
RUN=C:\OS2\ACPIDAEMON.EXE
RUN=e:\WATCOM\BINP\NMPBIND.EXE
RUN=E:\NDFS\NDCTL.EXE
EndStdErrIntercept()
SICGFUN13
TerminateStdErrIntercept()
DosCloseMessageFile()
StartShell()
PROTSHELL=C:\OS2\PMSHELL.EXE
InitStdErrIntercept()
BeginStdErrIntercept()
StartDaemonProcesses2()
DosSMSysInitSem in
SCREEN 80.B MapPhys 0x000A0000 Aprt 0x00020000 Flg 0x0001A410
SCREEN 80.B MapPhys 0x000C0000 Aprt 0x00008000 Flg 0x00018410
SCREEN missing category: 0x80, func: 0x11
SCREEN 80.B MapPhys 0x000C0000 Aprt 0x00010000 Flg 0x00018410
SCREEN missing category: 0x80, func: 0x11
!!!!   SCREEN$ : WaitApmEvent   !!!!



DevFS IOCTL 0x0B:0x01 DHdr:0x05780000






DevFS IOCTL 0x0B:0x01 DHdr:0x05780000



SCREEN 80.B MapPhys 0x000C0000 Aprt 0x00010000 Flg 0x00018410
SCREEN 80.B MapPhys 0xD0000000 Aprt 0x00B00000 Flg 0x0001A410
dhw_VMProcessToGlobal flg 0x00000000 laddr 0x1E8300BC cb 0x000010F8
dhw_VMProcessToGlobal flg 0x00000000 laddr 0x1F21441C cb 0x00000064
dhw_VMProcessToGlobal flg 0x00000001 laddr 0x18F804B0 cb 0x00000018
dhw_VMProcessToGlobal flg 0x00000000 laddr 0x1E9B0910 cb 0x0000000A
DosSMSysInitSem out
dRUN=C:\MMOS2\qrymmcd.exe
EndStdErrIntercept()
TerminateStdErrIntercept()
SICGFUN2
== DiscardDosHlp ==
PSDDisableAccess from sicgf2
== Free init segments ==
CPU1 going to work
CPU4 going to work
CPU5 going to work
CPU3 going to work
CPU2 going to work
CPU6 going to work
== Init R3 done ==
CPU7 going to work
DevFS FSCTL